Loading ...
Loading ...
Loading ...
Setting up as an Anynet+ (_,,,,,,,_DMI-CEC}-enab_ed device
Press the SOURCE: button, The Source screen appears, Select a connected device, and then press
the down directional button,
2, Select Anynet+ (HDMm-CEC} from the menu, The selected device is set up as an Anynet+ (HDMI-
CEC)-enabled device, The following menu options are available,
.....Ilhe menu options disp ayed o_ the men_ may differ Hay externa device,,
Anynet+ (HDMm-CEC}
Sets up the selected device as an Anynet+ (HDMl-CEC)-enabled device, and then displays a
list of all external devices connected to the TV. If you select an external device in the list, it is
used as the input source so that you can watch TV through that device. If you select View TV,
Anynet+ (HDMI-CEC) is exited so that you can watch TV without intervening of any external
device.
Read before connect[n9 an Anynet+ (HDMI-CEC}
Anynet+ cannot be used to control external devices that do not support HDMI-CEC,
Anynet+ (HDMI-CEC}-enabled devices must be connected to the TV with an HDMI cabe, Note that some
HDMI cabes may not support Anynet+ (HDMI-CEC}.
The TV remote control may not work under certa n c rcumstances, If this occurs, set up the device as the
Anynet+ (HDMI-CEC)-enabled devce again,
Anynet+ (HDMI-CEC} works ony with external devices that support HDMI-CEC and only when those
devices are ether n standby mode or turned on,
Anynet+ (HDMI-CEC} can contro up to 12 comp iant external devices (up to 3 of the same type} except for
home theaters, Anynet+ (HDMI-CEC} can contro only one home theater system,
To listen to 5.1-channel audio from an external dev ce, connect the device to the TV via an HDMI cabe and
connect the home theater system d rectty to the TV's dgta audo output connector_
Loading ...
Loading ...
Loading ...