Loading ...
Loading ...
Loading ...
14 EN EN 15
Auto-Cleaning Mode
After startup, RoboVac moves from the Self-Empty Station and
automatically determines its cleaning route, following a Z-shaped cleaning
path. When the cleaning is finished, RoboVac automatically returns to the
Self-Empty Station.
Press to start cleaning in Auto-Cleaning mode.
Spot Cleaning Mode
RoboVac intensively cleans a specific area in a spiral pattern, which is
useful if there is a concentrated area of dust or debris. In Spot Cleaning
mode, RoboVac will stop cleaning after 2 minutes.
• Press on RoboVac to start cleaning in Spot Cleaning mode.
Select a Suction Power Level
In the eufy Clean app, select a suction power level according to your
needs:
Quiet, Standard (Default), Turbo and Max.
• When RoboVac starts cleaning next time, it will clean according
to the suction power level you previously selected.
Use Mopping System
• The mopping mode is only intended for a clean floor without
stubborn stains. To avoid staining floors, do not use the
mopping function when dust is mixed with liquids such as
coffee or ink.
• Mopping system cleans best on smooth hard surfaces and
may not perform so well on uneven tiles, heavily waxed floors
or rough surfaces like slate or brick, which may snag the
mopping module.
• The mopping mode is not recommended for use when no one
is at home.
• Do not use the mopping mode on a carpeted floor. It is
recommended to set a physical barrier to avoid cleaning the
carpeted area.
1
Before mopping, make sure the protective pad has been installed
under the Self-Empty Station.
2
Remove the mopping module and water tank.
3
Wet the mopping cloth and wring it until it does not drip, then
attach the cloth to the mopping module.
4
Open the water inlet cover to fill with water, then close the cover.
• Only use the cleaning solution designated by eufy, otherwise it
may affect the cleaning effect and damage the device.
5
Install the water tank and the mopping module under RoboVac with
a click.
6
Start cleaning. RoboVac will automatically vacuum and mop.
During mopping, you can choose among three water levels via the
eufy Clean app.
7
When RoboVac finishes cleaning, remove the mopping module,
dust box, and water tank.
8
Clean the dust box and water tank, empty any remaining water,
and clean the mopping cloth to prevent mildew or unpleasant
smells. For how to clean and maintain the components, refer to the
“Cleaning and Maintenance” section in this manual.
Use RoboVac with Amazon Alexa / The
Google Assistant
Amazon Alexa or the Google Assistant is a smart voice control device that
enables you to control RoboVac with your voice.
Before you start, make sure that:
• RoboVac is attached to the Self-Empty Station to ensure there is enough
power.
• RoboVac is connected with the eufy Clean app.
Loading ...
Loading ...
Loading ...