Loading ...
Loading ...
Loading ...
19
ASSEMBLY
STEP 10
10.1 Hardware Removal: Use the Multi Hex Tool with Phillips Screwdriver provided to remove
the four Hex Bolts (45) from the back of the Console (43). Use the Multi Hex Tool with Phillips
Screwdriver to remove the two Hex Bolts (46) from the right side of the Front Post (48)
10.2 Installing the Console: Connect the Extension Hand Pulse Sensor Wires III (44) and
Extension Sensor Wire I (50) to the wires at the rear of the Console (43). Carefully tuck the wires
into the Front Post (48). Attach the Console (43) onto the Front Post (48) with the four Hex Bolts
(45) that were previously removed. Tighten the Hex Bolts (45) using the Multi Hex Tool with
Phillips Screwdriver provided.
10.3 Installing the Bottle Holder: Attach the Bottle Holder (47) onto the Front Post (48) with two
Hex Bolts (46) that were previously removed. Tighten the bolts with the Multi Hex Tool with
Phillips Screwdriver provided.
Tool:
Multi Hex Tool with
Phillips Screwdriver
S10, S13, S14, S15 1PC
Loading ...
Loading ...
Loading ...