Loading ...
Loading ...
Loading ...
15
ASSEMBLY
STEP 6
6.1 Hardware Removal: Use the 6mm Allen Wrench with Phillips Screwdriver provided to
remove the four Flat Washers (40), four Hex Bolts (49), one Hex Bolt (39), and one Big Curve
Washer (36) from the tube of the Front Main Frame (73).
6.2 Installing the Front Post Cover: Slide the Front Post Cover (54) up on to the Front Post (48)
and keep it there. Connect the Extension Sensor Wire (51) to the Extension Sensor Wire I (50).
Connect the Extension Hand Pulse Sensor Wire II (55) to the Extension Hand Pulse Sensor
Wire III (44); make sure the wires are not pinched and stay connected. Place the Front Post (48)
onto the Front Main Frame (73).
6.3 Installing the Front Post: Insert the Front Post (48) onto the tube of the Front Main Frame
(73). Reinstall the previously removed hardware: four Flat Washers (40), four Hex Bolts (49), one
Hex Bolt (39), and one Big Curve Washer (36) and securely tighten the bolts using the 6mm
Allen Wrench with Phillips Screwdriver provided. Slide the Front Post Cover (54) down to cover the
hardware.
Tool:
6mm Allen Wrench with
Phillips Screwdriver
1PC
Loading ...
Loading ...
Loading ...