Loading ...
Loading ...
Loading ...
13
ASSEMBLY
STEP 4
4.1 Hardware Removal: Use the Multi Hex Tool with Phillips Screwdriver to remove the four
Hex Bolts (24) from the Back and Seat Support Bracket (17).
4.2 Installing the Right/Left Handrail Support Tubes: Align the holes of the Right Handrail
Support Tube (21) and the Back and Seat Support Bracket (17). Re-insert two Hex Bolts (24)
into the Right Handrail Support Tube (21) and use the Multi Hex Tool with Phillips Screwdriver
provided to tighten until secure. Repeat the same assembly steps for the Left Handrail Support
Tube (23).
4.3 Installing the Seat: Align the holes of the Seat (16) and the Back and Seat Support
Bracket (17). Insert the four Hex Bolts (19) with four Flat Washers (18) into the Back and
Seat Support Bracket (17). Use the 5mm Allen Wrench provided to tighten the four Flat
Washers (18) and four Hex Bolts (19) until secure.
Tool:
6mm Allen Wrench with
Phillips Screwdriver
1PC
5mm Allen Wrench
1PC
Tool:
Hardware:
(19) Hex Bolt
4 PCS
(18) Flat Washer
4 PCS
Loading ...
Loading ...
Loading ...