Loading ...
Loading ...
Loading ...
17
ASSEMBLY
STEP 8
8.1 Installing the Backrest: Attach the Backrest (5) and Left Handrail (4) onto the Back and
Seat Support Bracket (17), using four Hex Bolts (2) and four Flat Washers (3). Tighten the Hex
Bolts (2) using the 5mm Allen Wrench provided.
8.2 Connecting the Wires: Connect the Hand Pulse Sensor Wire (6) from the Left Handrail (4)
to the Extension Hand Pulse Sensor Wire (13) from the Right Handrail (12). Insert the Right
Handrail (12) into the Left Handrail (4) being careful not to pinch the wires. Secure the Left
Handrail (4) and Right Handrail (12) using two Carriage Bolts (9), two Big Curve Washer (10),
and two Cap Nuts (11). Tighten the Cap Nuts (11) using the Multi Hex Tool with Phillips
Screwdriver provided.
8.3 Connecting the Pulse Wire to the Frame: Connect the Extension Hand Pulse Sensor Wire
I (29) to the Hand Pulse Sensor Wire (6) and Extension Hand Pulse Sensor Wire (13).
Hardware:
(2) Hex Bolt
4 PCS
(9) Carriage Bolt
2 PCS
(10) Big Curve Washer
2 PCS
(11) Cap Nut
2 PCS
(3) Flat Washer
4 PCS
Tool:
Multi Hex Tool with
Phillips Screwdriver
S10, S13, S14, S15 1PC
5mm Allen Wrench
1PC
Loading ...
Loading ...
Loading ...