Loading ...
Loading ...
Loading ...
12
ASSEMBLY
STEP 3
3a. Hardware Removal: Use the 6mm Allen Wrench with Phillips Screwdriver provided to
remove the six Hex Bolts (39) and the six Flat Washers (40) from the Rear Main Frame (26).
3b. Installing the Main Frame: Connect the Extension Hand Pulse Sensor Wire I (29) from the
Rear Main Frame (26) with the Extension Hand Pulse Sensor Wire II (55) from the Front Main
Frame (73). Insert the Rear Main Frame (26) into Front Main Frame (73). Make sure the wires
stay connected and are not pinched. Re-insert the six Hex Bolts (39) and the six Flat Washers (40)
into the Front Main Frame (73). Tighten the six Hex Bolts (39) using the 6mm Allen Wrench with
Phillips Screwdriver Provided.
Tool:
6mm Allen Wrench with
Phillips Screwdriver
1 PC
Loading ...
Loading ...
Loading ...