Loading ...
Loading ...
Loading ...
14
ASSEMBLY
STEP 5
5.1 Hardware Removal: Use the 6mm Allen Wrench with Phillips Screwdriver to
remove the eight Hex Bolts (39) and the eight Flat Washers (40) from the Seat Sliding
Tube (15). Retain the hardware for Back and Seat Support Bracket installation. 5.2.
5.2 Installing the Back/Seat Support Bracket : Attach the Back and Seat Support
Bracket (17) onto the Seat Sliding Tube (15) using the eight Hex Bolts (39) and the eight
Flat Washers (40) that were previously removed. Tighten the Hex Bolts (39) with the 6mm
Allen Wrench with Phillips Screwdriver provided.
5.3 Installing the L-Shape Knob: Install the L-Shape Knob (97) and tighten it by
turning in a clockwise direction.
Tool:
6mm Allen Wrench with
Phillips Screwdriver
1PC
Loading ...
Loading ...
Loading ...