Loading ...
Loading ...
Loading ...
Troubleshooting
Problem Possible Causes What to Do
Nothing works. Oven is not connected to electrical Ensure the oven is connected to a properly sized
3ower. electrical power supply which was installed by a
qualified electrician.
Power supply is not energized.
Top burners do not light or
do not burn evenly.
Burner flames very large
or yellow.
Sparking, but no flame
ignition.
Igniters spark continuously
after
flame ignition.
Burner flame goes out at
low setting.
Plug on range is not completely inserted
inthe electrical outlet.
Burner holes on the side of the burner
may be clogged.
Burner ports are clogged.
Burner heads or burner caps are not
3ositioned properly.
Cooktop is being operated with the
wrong type of gas.
Regulator is not installed, is faulty, or is
set for the wrong type of gas.
Gas shut-off valve is in "off" position.
Power supply polarity is reversed.
Igniters are wet or dirty.
Low gas supply pressure.
Air intake holes around knobs are
obstructed.
Oven settings are not correct.
Have an electrician check power supply, including
the house circuit breaker, wiring and fuses.
Make sure the unit is properly connected to power
supply.
Remove the burner heads and clean them. Check
the electrode area for burned-on food or grease.
See "Care and Cleaning".
Clean burner ports with straightened paper clip,
needle or wire.
Remove and carefully re-install burner and caps.
Ensure that the type of cooktop components
match the gas supply being used.
Check installation, replace regulator, or set
regulator for proper gas supply.
Turn shut-off valve to "on" position.
Have polarity corrected
Dry or clean igniters.
Contact gas company
Remove obstruction.
Oven will not heat. Follow mode selection and clock settings as
specified in OVEN OPERATION.
Foods over-cooked or Incorrect cooking time, or temperature. Adjust time, temperature or rack position.
under-cooked.
"Cracking" or "popping" This is the sound of the metal heatting This is normal.
sound and cooling.
Loading ...