Loading ...
Loading ...
Loading ...
Care and Cleaning
CLEANINGKNOBSAND KNOBBEZELS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
The control knobs provided with this appliance are designed for ease of use and
longevity. The "D" shaped design of the knob shaft ensures proper orientation
when reinstalling the knob.
The knobs and knob bezels are made of a composite plastic. These components
should be washed regularly in warm, soapy water. Hand dishwashing liquid is
excellent for this task. Knobs should be removed by gently pulling them straight out
and off of the valve shafts. Use caution to avoid introduction of moisture into the
control panel behind the bezels. To replace knobs, align the "D-shaped" opening at
the bottom of the knob with the "D-shaped" valve shaft, then carefully press the
knob onto the valve.
CLEANINGBURNERBASES
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
The base should be wiped clean using a soft cloth or sponge that has been lightly
dampened with warm water and hand dishwashing liquid. Thoroughly clean and dry
the igniters to prevent constant sparking of the re-ignition system. Refer to the
Cleaning the Burner Igniters section for cleaning tips.
Loading ...
Loading ...
Loading ...