Loading ...
Loading ...
Loading ...
OPERATINGTHEQUICK-LINK® SYSTEM
The Quick-Link® system enables the use of these
optional add-ons.
Blower/Vacuum ....................... RBV1i 00A
Cultivator ............................ RGC1100A
Edger ............................... RLE1100A
Hedge Trimmer ....................... RHS1100A
Sweeper/Blower ...................... RLS1100A
Tree Pruner .......................... RGP1100A
Vacuum ............................. RLV1100A
WARNING: Read and understand operator's
manual for add-on prior to operation,
Removing the Cutting Attachment or Add-Ons:
1. Turn the knob counterclockwise to loosen (Fig. 24).
2. Press and hold the release button (Fig. 24).
3. Whilst firmly holding the upper Shaft Tube, pull the
cutting attachment or add-on straight out of the
Quick-Link ® coupler (Fig. 25).
Installing the Cutting Attachment or Add-Ons:
Id_lb ARNING: To avoid serious personal injury
and damage to the unit, shut unit off before
removing or installing add-ons.
NOTE: To make installing or removing the add-on
easier, place the unit on the ground or on a work
bench,
1. Turn knob counterclockwise to loosen (Fig. 24).
Quick-Link® Coupler
Release Button
2. Whilst firmly holding the add-on, push it straight into
the Quick-Unk ® coupler (Fig. 25).
NOTE: Aligning the release button with the guide recess
will help instaUation (Fig. 24).
Release Button
Pdmary Hole
Upper Shaft Tube
Lower Shaft Tube
Fig. 25
3. Turn the knob clockwise to tighten (Fig. 26).
CAUTION: Lock the release button in the
primary hole and securely tighten the knob
before operating this unit.
90° Edging Hole
180 ° Edging Hole
Guide Recess
Fig. 24 ..........
Fig.26 .................................
CAUTION: The cutting attachment and
add-ons with the Quick-Link® system are to
be used in the primary hole unless stated
otherwise in the specific add-ons operator's
manual. Using the wrong hole could lead to
personal injury, or damage to the unit.
For edging when using the line head cutting attachment
with Quick-Link® models, lock the release button of the
cutting attachment into the 90 ° edging hole or the 180 °
edging hole(Fig, 26).
WARNING: Do not use the cutting blade for
edging or as an edger, severe personal injury
to yourself or others can occur.
16
Loading ...
Loading ...
Loading ...