Ryobi 890R Hi Tech 4 Stroke Brushcutter Trimmer

Operator’s Manual - Page 13

For 890R.

PDF File Manual, 28 pages, Read Online | Download pdf file

890R photo
Loading ...
Loading ...
Loading ...
RECOMMENDED FUEL TYPE
Old fuel is the primarj reason for the unit not
running properly. Be sure to use fresh, clean,
unleaded Petrol (gasoline).
NOTE: This is a four cycle engine. In order to avoic_
damage to the unit, do not mix oil with Petrol
(gasoline).
Definition of Blended Fuels
Today's fuels are often a blend of petrol [gasoline) and
oxygenates such as ethanol, methanol or MTBE (ether).
Alcohol-blended fuel absorbs water. As little as 1%
water in the fuel can make fuel and oil separate or form
acids when stored. Use fresh fuel (leas than 60 days
old), when using alcohol-blended fuel.
Using Blended Fuels
If you choose to use a blended fuel, or its use is
unavoidable, follow recommended precautions.
Always use fresh unleaded petrol (gasoline)
Use the fuel additive STA-BIL ® or an equivalent.
Drain tank and run the engine dry before storing unit.
Using Fuel Additives
The use of fuel additives, such as STA-BIL ® Gas
Stabilizer or an equivalent, will inhibit corrosion and
minimize the formation of gum deposits. Using a fuel
additive can keep fuel from forming _armful deposits in
the carburetor for up to six (6) months. Add 23 ml
(0.8 oz.) of fuel additive per gallon of fuel according to
the instructions on the container. NEVER add fuel
additives directly to the unit's petrol (gasoline) tank.
FUELING UNIT
WARNING: Petrol (gasoline) is extremely
flammable and its vapors can explode if
ignited. To avoid serious personal injury,
always stop the engine and allow it to cool
before filling the fuel tank. Do not smoke
whilst filling the tank. Keep sparks and open
flames away from the area.
1. Remove fuel cap (Fig. 20).
injury from petrol (gasoline) spray.
IA °'°w"°°v°'°I
%.
Gas Can
\
Fuel Tank
2. Place spout of petrol [gasoline) container into the fill
hole on the fuel tank (Fig. 20) and fill tank.
l_lb ARNING: Add petrol (gasoline) in a clean I
well ventilated area outdoors. Avoid creating
a source of ignition for spilt fuel.
NOTE: Do not overfill tank.
3. Wipe up any petrol (gasoline) that may have spilled
4. Reinstall the fuel cap.
WARNING: Never operate the unit without
the fuel cap securely in place.
5. Move the unit at least 9.1 meters (30 ft) from the
fueling source and site before starting the engine.
13
Loading ...
Loading ...
Loading ...