Loading ...
Loading ...
Loading ...
Rinnai 30 ES_FT_OIM
HEATER INSTALLATION
4. COMMISSIONING
For Commissioning Instructions, refer to the Commissioning sheet attached behind the front panel of this appliance.
5. INSTALLATION AND COMMISSIONING CHECKLIST
1. Complete BOTH the “INSTALLATION RECORD” (Step 6.) and “FINAL CHECKLIST” (Step 7.) below.
2. Instruct customer on the operation of the Energysaver.
3. Ensure the customer understands the content of this manual.
6. INSTALLATION RECORD
Installers / Gas Fitters Details
Installers Name: _____________________________________________________________________
Company Name: _____________________________________________________________________
Company Address: _____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
Company Contact Details
Telephone: _____________________________________________________________________
Mobile Phone: _____________________________________________________________________
Compliance Details
Certificate of Compliance / Certification Number: ______________________________________________
Authorised Persons - Licence Number: _______________________________________________________
Installers Signature: _____________________________________________________________________
Installation Date: _____________________________________________________________________
Appliance Details
Model Number: _____________________________________________________________________
Serial Number: _____________________________________________________________________
Installation Address: _____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
Advise the customer that during the initial burning in period of approximately 2 hours, some
vapour and smell may be emitted from the heater. This is normal operation for a new heater.
During this period the heater should be operated on ‘High’ and the space being heated should be
well ventilated.
The louvre grille and rear cover fitted to this appliance reduce the risk of fire and injury, no part of
it should be permanently removed.
Ensure the Customer understands that:
No part of this appliance should be permanently removed.
Paper or other material must not be forced into the louvres of this appliance.
Young children and the infirm should be supervised at all times while in the vicinity of this
appliance while it is in operation or able to be turned on.
N OT E
WARN I N G
Loading ...
Loading ...
Loading ...