Loading ...
Loading ...
Loading ...
30
(1) ⚠DANGER If the plug is not safely accessible, the device must be sw itched off
at the main circuit breaker.
Pan does not heat up on
cooking zone.
Indicator is not illuminated
No power supply.
Check incoming power supply (Example, power
cable plugged into the wall socket). Check
kitchen main fuse box.
Unit is turned off. Turn control knob to an ON position.
Defective unit
Only if possible and safe, disconnect the appli-
ance from the power supply. Contact an au-
thorized service agency. (1)
Pan does not heat up and
LED indicator flashes at
steady rate.
Pan is too small.
Use a suitable pan with bottom diameter larger
than 12cm[5”].
Pan is not placed in the cen-
ter of cooking zone; pan is
not detected by sensor.
(2)
Move the pan to the center of the cooking
zone.
Unsuitable pan. Select only induction ready cookware.
Defective unit.
Only if possible and safe, disconnect the appli-
ance from the power supply. Contact an au-
thorized service agency. (1)
Poor heating, LED
indicator is steady ON
Air cooling system is obstruct-
ed.
Verify that air vents are not obstructed. Ensure
the fresh air filter is clean.
Unsuitable pan.
Select various induction ready cookware for
induction cooking. Then compare the results.
Ambient temperature is too
high.
The cooling system is not
able to keep the appliance in
normal operating conditions.
Verify that no hot air is taken in by the fan.
Reduce the ambient temperature. The intake
air temperature must be lower than 40°C
[104°F].
One phase is missing.
Check incoming power supply (Example, power
cable plugged into the wall socket). Check
kitchen main fuse box.
Defective unit.
Only if possible and safe, disconnect the appli-
ance from the power supply.
Contact an authorized service agency. (1)
Appliance does not react
to control knob positions
Unit is turned off. Turn control knob to an ON-position.
Defective control knob.
Only if possible and safe, disconnect the appli-
ance from the
power supply. Contact an authorized service
agency. (1)
Small metallic objects
(e.g. spoon) are heated
up in the cook zone.
Pan detection function is de-
fective.
Only if possible and safe, disconnect the appli-
ance from the power supply. Contact an au-
thorized service agency. (1)
Loading ...
Loading ...
Loading ...