Tripp Lite PDUMNH30HVAT2 OWNER’S MANUAL

Loading ...

Configuration and Operation

Remote Monitoring and Control (Select Models)

Models PDUMH30ATNET, PDUMNH30AT2, PDUMH30HVATNET, PDUMNH30HVAT2,

PDUMH32HVATNET and PDUMNH32HVAT2 provide remote monitoring, outlet control

and more via Web browser, telnet and SNMP-based Network Management Systems.

For more information about configuration and operation of the PDU via the PowerAlert

Web browser interface, refer to the WEBCARDLX Owner’s Manual included with this

product or downloadable at tripplite.com.

Load "Ramping" on Startup: All models arrive from the factory programmed so that,

when first powered up, their outlets turn on in sequential order at intervals of

approximately 250 ms. This prevents circuit overloads by staggering the startup of

multiple devices. Models PDUMH30ATNET, PDUMH30HVATNET and

PDUMH32HVATNET support user-programmable startup of outlets in any order or time

interval. This ensures that network items are turned on in the proper sequence with

the appropriate delay, so that network items are reliably discovered on startup.

Programmable Load "Shedding" During a Power Failure: In the event the primary

power source fails and the PDU is relying on the secondary power source, load

shedding allows you to program the shutoff of specific outlets at timed intervals. This

enables you to turn off less critical loads (monitors, for example) to maximize the UPS

runtime for the most critical items.

Service

Your Tripp Lite product is covered by the warranty described in this manual. A variety of

Extended Warranty and On-Site Service Programs are also available from Tripp Lite. For

more information on service, visit tripplite.com/support. Before returning your product

for service, follow these steps:

1. Review the installation and operation procedures in this manual to insure that the

service problem does not originate from a misreading of the instructions.

2. If the problem continues, do not contact or return the product to the dealer.

Instead, visit tripplite.com/support.

3. If the problem requires service, visit tripplite.com/support and click the Product

Returns link. From here you can request a Returned Material Authorization (RMA)

number, which is required for service. This simple on-line form will ask for your

unit’s model and serial numbers, along with other general purchaser information.

The RMA number, along with shipping instructions will be emailed to you. Any

damages (direct, indirect, special or consequential) to the product incurred during

shipment to Tripp Lite or an authorized Tripp Lite service center is not covered

under warranty. Products shipped to Tripp Lite or an authorized Tripp Lite service

center must have transportation charges prepaid. Mark the RMA number on the

outside of the package. If the product is within its warranty period, enclose a copy

of your sales receipt. Return the product for service using an insured carrier to the

address given to you when you request the RMA.

Loading ...

Tripp Lite PDUMNH30HVAT2 5.8kW 208/240V Single-Phase ATS/Monitored PDU - 16 C13, 2 C19 & 1 L6-30R Outlets, Dual L6-30P Inputs, 10 ft. Cords, 2U, TAA