Loading ...
Loading ...
Loading ...
L I T E
CAREAND CLEANING
Self-Cleaning Cycle (cont.)
The Clean Cycle, including cooldown
time, is automatically set for 4 hours
20 minutes and automatically turns off
after the set time, but you may
change this from 3 hours if oven is
lightly soiled, up to 5 hours if oven is
heavily soiled
Touch the CLEAN pad.
4 hours 20 minutes will
show in the display
if you want to change
the length of clean time,
touch the HOUR/MIN
UP and/or DOWN
arrow pads
ST_R_ 3. Touch the START pad
The door locks automatically The
display will show the clean time
remaining tt will not be possible to
open the oven door until the
temperature drops below the lock
temperature and the LOCKED DOOR
light goes off
When the LOCKED DOOR light is
off, open the door
The words LOCK DOOR will flash
and the oven control will signal if you
set the clean cycle and forget to
close the oven door
(approx 1 hour) before attempting to
open the door,
After the cycle, you may notice some
white ash in the oven Just wipe it up
with a damp cloth or sponge_
if white spots remain, scrub them
with a soap-filled stee!-wool pad Be
sure to rinse thoroughly These are
usually deposits of salt that cannot
be removed during the cycle
If for any reason you are not
satisfied with the cleaning results,
just repeat the cycle.
Make sure the clock is set correctly
1. Touch the
CLEAN pad.
2_
If you want to change
the length of clean time
touch the HOUR/MIN
UP and/or DOWN
arrow pads
3. Touch the DELAY
START pad
. Touch the HOUR/MIN
UP and/or DOWN
arrow pads to set the
time you prefer the
clean cycle to start..
_ 5. Touch the
START pad
Touch the CLEAR/OFF pad. You will
need to wait for the oven temperature
to drop below the lock temperature
27
Loading ...
Loading ...
Loading ...