Loading ...
Loading ...
Loading ...
Use
24
Only adjust the degree of grinding levels in the direction of “finer” (15->1)during the
grinding process.
08. Turn the degree of grinding pre-selection to the required level. We recommend initially working
with setting 7-10 and then adjusting as required.
Initially, the degrees of grinding 1-3 are too fine with the new grinding mechanism at the
beginning. They should only be used after a certain appliance running time, as the components of the
conical grinding mechanism settle slightly after longer use.
09. Pick up the filter holder and push it straight into the filter holder bracket .
The grinding process is activated by pressing the switch with the filter holder - also see page 15,
“Preparing the grinding mechanism”.
10. Let the grinding process run until the required coee quantity is ground. Afterwards, Then pull the the
filter holder out of the bracket.
With the large brewing filter, you can also prepare two single espressos by placing two cups next to one
another under the filter holder. The MAX marks in both of the brewing filters are intended to assist in identi-
fying the correct quantity of compressed, ground coee more easily.
05. Push the brewing filter ( or ) into the filter holder.
06. Press the ON/OFF button. The grinding mechanism standby indicator will light up. The ON/OFF,
HOT-WATER , single espresso and double espresso buttons will slowly dim on/o.
07. After approx. 20 seconds, the heating process is completed and the buttons will light up continuously.
NOTICE!
Loading ...
Loading ...
Loading ...