Loading ...
Loading ...
Loading ...
Flushing the water system
Prior to initial use
17
Prior to initial use and after a longer period of disuse of the espresso machine, allow the contents of
approx. 2-3 cups of water to run through the machine. This will clean the water circuit and all parts
will be heated up.
During initial use, it may occur that the pump makes slightly louder noises. This is normal. After a short time,
the system has filled with water and the noise will diminish.
The lid of the water tank can be folded forwards and backwards, and can also be used for holding the tank
when inserted.
01. Ensure that the steam controller is switched to OFF and disconnect the power plug, if necessary.
02. Fill the tank with fresh, cold, still water. Pay attention to the MIN and MAX filling marks:
03. Insert the water tank by first holding it flush against the back of the espresso machine and then let it
slide downwards, until the contour is flush with the machine. Flip the lid down.
04. Insert the drip tray with the draining rack .
05. Install the unfilled filter holder by aligning it to the left with the handle at the front, then moving it
horizontally upwards into the filter holder bracket and turning it to the right as far as it will go.
06. Align the steam jet/hot water jet with the opening in the draining rack .
07. Connect the power plug to a socket. A beep tone will sound.
Loading ...
Loading ...
Loading ...