Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/95298851-hdp4000/bg21.png)
User Manual
33
Open the IO software, select to add a device, set the corresponding baud rate, test the
VISA address, and click OK to add a new device.
As with USB remote control, after obtaining normal communication, you can use SCPI
commands to control the power output.
9.4 GPIB remote control
Utility->I/O Config->GPIB to open GPIB window. Use the numeric keypad to set the address of
GPIB and press ENTER to confirm.
Loading ...
Loading ...
Loading ...