Loading ...
Loading ...
Loading ...
User Manual
15
LT: Low temperature protection. The sensor is lower than -10℃, which may be due to
environmental problems too low, or the sensor is damaged. So channels are forbidden to
output. When the hardware restored to normal, this phenomenon is eliminated.
MV: If voltage out of control, it may be the adjustment tube is damaged. So channels
are forbidden to output. After reset and restart, this phenomenon is eliminated.
LE: May be that the 220V supply voltage inputs to the device of the 110V input
configuration, in which case the channels is forbidden to output. When the hardware
restored to normal, this phenomenon is eliminated.
6. The actual output voltage and current value of the channel
7. User-set voltage and current values
8. Auxiliary Menu Bar
4.2 Meter View
1. The serial number of the currently selected channel
2. Over-protection status and set value
3. The output status/mode of the currently selected channel
4. Set time for channel delay to open or close
5. User-set voltage and current values
6. The actual output voltage and current value of the channel
Loading ...
Loading ...
Loading ...