Loading ...
Loading ...
Loading ...
User Manual
24
Steps to set the output list:
1. Select the output channel
Press the channel button on the front panel to select the output channel, and press "Output
List" to enter the output list setting interface.
2. Create a list
◆Add/remove step
Press the "Add" soft key to insert a new step below.
Press the "Delete" soft key to delete the current step.
Press the "Clear All" soft key to clear all steps.
◆Set list output
Use the arrow keys to move the cursor to position, and use the numeric keyboard to set the
output voltage and current. Press "×" to delete, press "Enter" to confirm and exit editing.
◆Set output dwell time
The "Time" column is used to set the running time of each step output, the unit is s, and the
setting range is 0.01-3600s.
◆
Set trigger response
Press the "Enter" key to set the trigger response.
BOST: Choose whether to output the trigger signal before the current step starts to run.
EOST: Choose whether to output the trigger signal after the current step operation ends.
3. Set list properties
Press "Properties" to enter the list property setting interface.
Loading ...
Loading ...
Loading ...