Loading ...
Loading ...
Loading ...
User Manual
20
Setting steps:
1. Select the output channel
Press the digital channel button on the front panel, or continuously press the left "
◁
" and
right "
▷
" arrows to select the output channel to be set.
2. Set voltage/current:
Press the arrow keys to select voltage or current, use the numeric keyboard or knob to set
the value, press "×" to delete, and press "Enter" to confirm and exit editing.
3. Turn on the output
Press the "On/Off" key to turn on the output.
2. Over protection
Set the overvoltage and overcurrent protection in Source Settings.
OV Protection: If the output voltage reaches the voltage protection value, the output status
of the channel becomes OV, and the output is disabled;
OC Protection: If the output current reaches the current protection value, the output status
of the channel becomes OC, and the output is disabled.
3. Channel delay
Set the channel delay in Source Settings, the range of delay that can be set is 0～3600s.
After setting the delay, press [All On/Off] on the front panel, and each channel will output
and close in the order of delay.
Loading ...
Loading ...
Loading ...