Loading ...
Loading ...
Loading ...
User Manual
25
◆Voltage/Current After List: Set the output value after the list output is completed.
Last list value: After the list output is completed, the last list value is output.
Return to DC Value: After the list output is completed, the DC value before the list becomes
effective is output.
◆Pace: Set the output step.
Dwell: Take the dwell time as the pace, the dwell time ends, and enter the next step;
Trigger: After the output is triggered, the dwell time ends, and enter the next step at the
external trigger pace.
◆Trigger Source: Set the trigger source.
List Run/Stop Key: Set the Run/Stop key as the trigger source.
Set the DIO trigger input as the trigger source. After pressing Run/Stop to run the list, the
output is triggered by external signal changes. (Note that you need to set the Pin function to
Trigger In: Utility->I/O Config->Digital IO).
Remote Command: Set the remote command as the trigger source. After pressing
Run/Stop to run the list, send an SCPI command to trigger the output. (For remote interface
settings, please refer to 9. Remote Control)
For example:
List:trig (@1) Trigger the list output of channel 1.
◆
Trigger Delay: Set the trigger delay time, the range is 0-3600s.
◆Repeat Count: Set the repeated output times of the list, the range is 1-255.
◆Continuous: Press "Enter" key to select whether to output continuously.
4. Run/Stop
Set the output list to run or stop. During operation, the output value is displayed in the
corresponding channel of the main interface.
Loading ...
Loading ...
Loading ...