Loading ...
Loading ...
Loading ...
32 OPERATION
5 Assemble the cover or snap closed the fill lid.
a Tank cover
b Fill lid
CAUTION
• Make sure the steam feeder tank cover and fill
lid are closed before putting the tank in the
oven.
• Use potable water only.
• Do not fill the steam feeder tank with any fluid or
mixture other than water.
• Do not fill the steam feeder tank with hot water.
• Fill the steam feeder tank up to the line indicated
on the front.
• Do not tilt the steam feeder tank while it is full.
• Discard any remaining water and clean the
steam feeder tank after cooking.
• Use the steam feeder tank only for its intended
purpose of providing water for steam cooking.
• Monitor the water level in the tank and refill as
needed for steam cooking. Use oven mitts to
avoid burns when handling the hot tank.
6 Carefully insert the tank into the steam feeder
slot, making sure to keep the tank level while
carrying it. If the tank is not kept level, water
will drain out of the tubes in the back.
7 Slide the tank into the slot until it clicks into
place.
Steam Bake and Roast Mode (Upper
Oven Only)
The Steam Bake and Roast modes heat food
gradually, using both the oven heating elements
and moist steam heat. The oven can be
programmed to cook at any temperature from 210
℉ (100 ℃) to 550 ℉ (285 ℃). Preset temperature
options start at 350 ℉ (175 ℃).
Setting Steam Cook Mode
1 Press Steam Bake or Steam Roast.
2 Press Steam Level repeatedly to select the
steam level: Low, Medium, or High.
3 Press START and enter the desired
temperature using the number pad.
4 If desired, press Cook Time to set the cook
time or Start Time to set the delayed start
time. Press the numbers to set the time
settings.
5 Press START.
6 Once cooking is finished, allow the oven to
cool completely. Then wipe up any water left
on the oven interior.
NOTE
• Once Steam Bake cooking is started, an indicator
on the display shows the status of the steam
function.
• Make sure the steam feeder tank is filled with
water before starting the Steam Bake mode. If
the water in the tank runs out during cooking, a
chime sounds and a popup appears in the
display. The oven continues to cook without
steam.
• Remember to drain the steam feeder tank after
use, once it has cooled.
• When the temperature rises in the oven, steam
may not be visible.
• It is normal to hear the sound of boiling water
from the steam generator while running the
steam functions.
Changing the Steam Cook Settings
1 Press Steam Bake or Steam Roast.
2 Press the numbers to enter the desired
temperature.
en-us_main.book.book Page 32 Thursday, February 9, 2023 1:05 PM
Loading ...
Loading ...
Loading ...