Loading ...
Loading ...
Loading ...
15OPERATION
ENGLISH
Changing the Cook Time during Cooking
For example, to change the cook time to 1 hour
and 30 minutes during cooking:
1 Press Cook Time.
2 Change the baking time: press 1, 3, 0.
3 Press START to accept the change or press
Upper CLEAR / OFF or Lower CLEAR / OFF to
reset the time..
NOTE
• During the preheating mode, the convection fan
operates constantly to circulate the hot air. The
convection fan turns off automatically after the
preset temperature is attained.
• After any cooking cycle has been completed
cooling fans operate to protect the control
panel. This is normal.
Sabbath Mode
Sabbath mode is typically used on the Jewish
Sabbath and Holidays. While the oven is in Sabbath
mode, the temperature cannot be changed and
the timer, light, and alarm functions are disabled.
When the Sabbath mode is activated, the oven
does not turn off until the Sabbath mode is
deactivated. In Sabbath mode, all function buttons
are inactive.
sb will appear in the display. On
double ovens, either oven or both ovens can be
put in Sabbath mode.
1 Disconnect the probe. The probe function is
not available in Sabbath mode.
2 Press UPPER Bake or LOWER Bake.
3 Press the numbers to enter the desired
temperature.
4 Press START.
5 Press and hold Clock for 3 seconds. sb
appears in the display when the Sabbath
mode is activated.
6 To stop the Sabbath mode, press and hold
Clock for 3 seconds.
NOTE
• If a cook time is set, the oven turns off
automatically at the end of the cook time,
without chiming. The oven remains in Sabbath
mode, but is turned off.
• If no cook time is set, the oven will not
automatically turn off.
• After a power failure, the display will turn back
on in Sabbath mode, but the oven will be off.
• Always close the oven door before engaging
Sabbath Mode.
Minimum & Maximum Default Settings
All of the features listed have a minimum and a maximum time or temperature setting that may be
entered into the control. An entry acceptance beep sounds each time a control button is pressed.
An entry error tone (two short tones) sounds if the entry of the temperature or time is below the minimum
or above the maximum setting for the feature.
Feature Min. Time Max. Time Default
Warm -3 hr.
Self Clean 3 hr. 5 hr. 4 hr.
en-us_main.book.book Page 15 Thursday, February 9, 2023 1:05 PM
Loading ...
Loading ...
Loading ...