Loading ...
Loading ...
Loading ...
DIMENSIONS
Fig. 2 -- DOUBLE OVEN
A Cabinet Width 27" Mira
B Cutout Width 25" MinJ25 114" Max.
C Cutout Height 49 1/2" MtnJ50 1/8" Max.
D Cutout Depth 23 1t2" Min.
E Cutout Location 13 1/4"
H Overall Height 51 114"
W Overall Width 26 5/8"
Junction box
Allow 7t8" for
overlap of oven
over all edges
of cutout.
24"
J
2"x 4" OR
'0 5" _ EQUIVALENT
-r-- T
27"--------_
MIN.
H
2"X 4" or
Equivalent
Runners
56" MINo
NOTE: Locate an approved junction
box in one of the suggested Iota.
lions; a minimum of 56" above the
runners or 5" below the runners=
Be sure the oven support is solid
enough to support 200 lbs, Also, he
sure the oven support is level and
straight. There is no way to level the
oven after installation.
Allow minimum of 20" for
clearance to adjacent corners,
drawers, or walls, etc.
Your built-in oven is packed with a shipping base pad on
the bottom of the unit. The lower front trim Is shipped
separately and should not be used until you are ready to
Install the oven with door removed, after making electri-
cal connections. See Step 3.
Step 1:
Remove the oven door:
• Open the door to the stop position (See Fig. 3A).
• Grasp the door at each side and lift up and off the
hinges (See Fig, 3B)_
Fig, 3A
STOP POSITION
HINGE
Fig. 3B
CAUTION:
When the door is removed and hinge arms are at stop position, do not bump or try
to move the hinge arms. The hinges could snap back causing an injury to the
hands or damage to the porcelain on the front of the range. Cover the hinges with
toweling or insert empty towel rolls behind the hinges while working in the oven
area.
6 NEtNS12-3
Loading ...
Loading ...
Loading ...