Loading ...
Loading ...
Loading ...
TO SET SELF.CLEAH CYCLE:
1. Close oven door. Push CLEAN. The time display will
show (*---). See Fig. t, You may need to press
slightly on the door.
Fig. 1
2. Press or L_ to set the desired length of clean
time. Clean time is normally 3 hours, You can
change it between 2 and 4 hours, depending on how
dirty the oven is. See Fig. 2, The door locks
automatically after the controls are set. The display
will show "LOCK" when door locks.
TO tF,ITERRUPT A CLEAN CYCLE:
1. Push CLEARIOFF.
Follow instructions under "WHEN A CLEAN
CYCLE IS FiNiSHED."
TO SET DELAYED SELF.CLEAN
CYCLE:
Follow steps 1-3 under "TO SET SELF.CLEAN
CYCLE," THEN:
4, Press STOP TIME,
5. Set the time of day when you want the clean cycle to
end. See Fig, 4.
The control will calculate the start clean time.
Fig. 2
You can push STOP TiME to find out when the cycle
will end. Push CLEAN to return to countdown.
WHEN A CLEAN CYCLIE mS
FINISHED:
1. Wait until the LOCK display goes out. The oven
temperature must drop to a safe level before the door
can be opened. See Fig. 3,
Fig. 4
Note; When selecting a stop time for a delayed clean
cycle, you must allow time for the 2-4 hour clean
tlme.
Your oven light should be OFF during a self-clean cycle
to prolong the life of the bulb.
WAIT UNTIL LOCK GOES OUT
Fig. 3
If you cannot open the door immediately after the word
LOCK goes off, wait about one minute and try again.
16
NESCL07-1
Loading ...
Loading ...
Loading ...