Loading ...
Loading ...
Loading ...
NOTETOELECTR]CI.,_N;The3powerleads supplied with this appliance are UoL. recognized for connection
to larger gauge household wiring, The Insulation of these 3 leads is rated at temperatures much higher than the
temperature rating of household wiring. The current carrying capacity of the conductor is governed by the
temperature rating of the insulation around the wire, rather than the wire gauge alone,
WARNING:
IMPROPER CONNECTION OF ALUM_NU_ HOUSE WIRING TO COPPER LEADS
CAN RESULT iN AN ELECTRICAL HAZARD OR FIRE. USE ONLY CONNECTORS
DESIGNED FOR JOINING COPPER TO ALUMIHUM AND FOLLOW THE
MANUFACTURER'S RECOMMENDED PROCEDURE CLOSELY.
FOR ALL INSTALLATIONS
The oven may be supported by either a solid
bottom or two runners. The solid bottom or two
runners should be level with the bottom edge of
the cutout opening.
* if a solid bottom is used instead of the runners,
a 6" x 10" rectangle must be cut out of the bottom
(see Fig. 2) in order to provide enough cooling air
flew during self-clean operation.
H,,,,ll H,,,,,I =ill 1,, HI UnU = ,t "
PREPARE CABINET OPENING
DIMENSIONS
NOTE: The entire weight of the oven is sup.
ported by the 2" x 4" or equivalent runners. Make
sure these runners are level, rigidly mounted and
spaced 20 112" on center. The space between
the runners is 19" wide.
Fig. t _ SINGLE OVEN
Junction Box
Locations
A Cabinet Width 27" Min.
B Cutout Width 25" Min./25 1/4" Max.
C Cutout Height 27 1/2" M_n,/28 1/8" Max,
D Cutout Depth 23 1/2" Min.
E Cutout ]Location 32 1/2"
H Overall He!ght 29 1/4"
W Overall Width 2S 5/8"
2" X 4" or
Equivalent Runners
34"
Mine
n =lluHl,i =,,,ul
NOTE: Locate an ap-
proved junction box in one
ef the suggested loca-
tions; a minimum of 34"
above the runners er 5"
below the runners.
The even can be installed
in a 28 1/8" high cutout by
proper use of long shims
en bottom runners and
proper cabinet top re.
tainer. See Fig. 6.
Be sure the oven support
is solid enough to support
150 pounds. Aise be _ure
the even support is level
and straight. There is no
way to level the oven after
installation.
5 tj
Allow 7/8" for
overlap of oVen
over all edges
ofcutout,
Allow mlntmurn of 20" }'or clearance to adjacent corners,
drawers, or wails, etc,
NEIHS! 1-2
Loading ...
Loading ...
Loading ...