Loading ...
Loading ...
Loading ...
REPLACING OVEN LIGHT
Do not touch hot oven bulb, Do not
touch bulb with wet hands, Never
wipe oven light area with wet cloth.
Never touch the electrically live
metal collar on the bulb when re.
placing.
To remove:
1. Disconnect electric power to the oven at the main
fuse or circuit breaker.
2 Hold your hand undercover and firmly push back the
bail wire until it clears the cover. The cover will fall
into your hand, DO NOT REMOVE ANY SCREWS
TO REMOVE THE COVER,
3. Replace bulb witi_ 40-watt home appliance bulb,,
To replace cover:
!4 Place cover into groove of lamp receptacle. Pull wire
bail forward until itsnaps into place. Be certain wire
bail is in center of cover. Wire will hold cover firmly
when in correct position
2 Connect power to oven
BULB
BULB COVER BAIL WIRE
REMOVABLE KNOBS
All control knobs may be removed for easy cleaning by
pulling the knob straight off the stem. Be sure that the
knob is in the OFF position before removal-
Hint: Slip a thin cloth (such as a handkerchief) era piece
of string under and around the knob edge and pull up,,
Caution: Read these instructions carefully before re-
placing the knobs. Replacing the knobs improperly will
damage the knobs and the spring clips on the stems. If
this happens, the knobs will fit loosely,
To replace the OVEN SET knob:
1. The knob stem has a groove in each side, The groove
on one side has a spring clipo The other groove is
clear (see illustration),
2- Check the inside of the knob and find the molded rib,
3. Replace the knob by fitting the molded rib inside the
knob into the clear groove on the stem.
To replace the OVEN TEMP knob:
1 Match the fiat side of the "D" shaft on the knob to the
fiat side of the stem and replace knob
REPLACING OVEN SET KNOB
f
GROOVEIN STEM
/
GROOVE IN KNOB
REPLACING OVEN TEMP KNOB
"D" FLAT IN STEM
/
"D"FLATON KNOB
lg NEMNT16
Loading ...
Loading ...
Loading ...