Loading ...
Loading ...
Loading ...
(HDMI-CEC) sn°t Working
Confirm that the device is an Anynet+ device. The Anynet+ system supports
Anynet+ devices only,
Check if the power cord of the Anynet+ device is properly connected,
Check the cable connections of the Anynet+ device.
Go to Anynet+ (HDM_-CEC) (MENU > System > Anynet+ (HDM_-CEC)) and see if
Anynet+ does not Anynet+ (HDM_-CEC) has been set to On.
work. Check whether the TV remote controt is in TV mode.
Check whether the remote controt is Anynet+ compatible.
Anynet+ may not function when some other functions are active, including Channel
Search, Smart Hub, Initial Setup, etc.
mfyou have disconnected and then reconnected the HDMI cable, scan for devices
again or turn your TV off and on.
I want to start : Check if the Anynet+ device is properly connected to the TV, and then select the
Anynet+ Anynet+ (HDM_-CEC) (MENU > System :> Anynet+ (HDM_-CEC)) menu to see if
" Anynet+ (HDM_CEC) is set to On.
I want to exit Anynet+ Select View TV from the Anynet+ menu°
" Select a non-Anynet+ device from the Source tist.
The message
"Connecting to You cannot use the remote control when you are configuring Anynet+ or switching
Anynet+ dev'ce,_ ' to a viewing mode. Use the remote control after the TV has completed the Anynet+
or "Disconnecting configuration or has switched to a viewing mode,
from Anynet+ device"
appears on the screen.
Anynet+ (HDM_CEC) has been set to On.
The connected device Scan for Anynet+ devices again.
is not displayed, Anynet+ devices must be connected to the TV using an HDMm cable. Make sure the
device is connected to your TV with an HDMm cable. Some HDMm cables may not
support Anynet+,
if the connection is terminated because there has been a power failure or the HDMI
cable has been disconnected, please scan for the device again.
Connect an optical cable to the TV and the receiver,
The TV audio is not
being played through ARC enables the TV to output digital sound via the HDMm (ARC) port,
the receiver. However, ARC is onty avaiJable when the TV is connected to an audio receiver that
supports ARC.
Loading ...
Loading ...
Loading ...