Loading ...
Loading ...
Loading ...
There Is a Probmem with the
........[estin9 the ilPiOture
IMIEINU > Support > Self Diagnosis > Picture Test
Before you review the list of problems and solutions below, use Picture Test to determine if the
problem is caused by the TV. The Picture Test displays a high definition picture you can examine for
flaws or faults.
If your Samsung Tebvision is flickering or dimming sporadically, you may need to
Flickering and disaMe some of the energy efficiency features. Disable Energy Saving (MENU :>
Dimming System > Eco Solution > Energy Saving) or Eco Sensor (MENU > System > Eco
Solution > Eco Sensor).
If the color on your Samsung television screen is not correct or the Mack and white
colors are off, run Picture Test (MENU > Support > Se_f Diagnosis > Picture Test).
If the test results indicate that the problem is not caused by the TV, do the
following:
Component o Confirm that the TV's video input connectors are connected to the correct
Connections/Screen
Cotor external device video output connectors.
o Check the other connections as well. If the TV is connected to an external
device via a component came, confirm that the Pb, Pr, and Y jacks are plugged
into their proper connectors.
If the colors on your Samsung TV are correct but just a littJe too dark or bright, try
adjusting the following settings first.
Screen Brightness o Go to the Picture menu and adjust the BacMight, Contrast, Brightness,
Sharpness, Co_or, and Tint (G/R) settings.
If you notice ghosting or blurring on the screen, use the Auto Motion Plus function
Ghosting, Blurring, or (MENU > Picture > Picture Options > Auto Motion Plus) to resolve the issue.
Juddering d;_ This functio__ is not available on certain models in specific geographica_ areas
Unwanted Powering
Off
if your Samsung TV appears to turn off by itself, try disabling some of the TV's
energy efficiency functions. See if Sleep Timer (MENU > System :> Time > S_eep
Timer) has been enaMed. The Sleep Timer automatically turns the TV off after a
specified period of time. if the S_eep Timer has not been enabled, see if No Signa_
Power Off (MENU > System :> Eco Solution > No Signal Power Off) or Auto
Power Off (ME/_U > System > Eco Solution > Auto Power Off) has been enabled
and disable them.
Problems Powering On
number of things to check before calting the service department. Confirm that the
:: TV's power cord is connected correctly at both ends and that the remote control
is operating normalb: Make sure that the antenna came or cable TV came is firmly
connected. If you have a cable or satellite box, confirm that it is plugged in and
turned on.
Loading ...
Loading ...
Loading ...