Loading ...
Loading ...
Loading ...
200
Paper Feeding Problems
Paper Jam Problems Inside the Product
Paper Ejection Problems
Parent topic: Solving Problems
Paper Feeding Problems
If you have problems feeding paper, try these solutions:
• Place the product on a flat surface.
• If paper does not feed for printing, remove it. Then reload it in the middle of the rear paper feed. Slide
the edge guides against the edge of the paper, making sure that the paper stack is not above the
arrow mark on the edge guides.
• If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it.
• If multiple pages feed at once during manual 2-sided printing, remove any paper from the product
before reloading paper.
• If paper jams when you print on both sides of the paper, try loading fewer sheets.
• Make sure your paper meets the specifications for your product.
• Make sure the paper size and paper type settings on the control panel are correct.
• For best results, follow these guidelines:
• Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick.
• Load paper in the rear paper feed printable side up.
• Follow any special loading instructions that came with the paper.
Parent topic: Solving Paper Problems
Related references
Paper Loading Capacity
Paper Specifications
Paper Jam Problems Inside the Product
Related tasks
Loading Paper in the Rear Paper Feeder
Cleaning Your Product
Loading ...
Loading ...
Loading ...