Loading ...
Loading ...
Loading ...
Accessing the menu of the external device
1.
Press the SOURCE button. The Source screen appears. Select a connected device, and then press
the down directional button.
2.
Select Anynet+ (HDMI-CEC) from the menu. The following list appears.
"
The menu options displayed on the menu may differ by external device.
●
Anynet+ (HDMI-CEC)
Displays a list of HDMI-CEC-compliant devices connected to the TV. Select View TV to exit
Anynet+ (HDMI-CEC), and start watching TV. Select an external device to switch to the screen of
the device.
Read before connecting an Anynet+ (HDMI-CEC)
"
You can configure the TV's universal remote control to control third-party cable boxes, Blu-ray players, and
home theaters that do not support HDMI-CEC. For more information, refer to "Controlling External Devices
with the TV Remote - Using the Universal Remote."
"
Anynet+ cannot be used to control external devices that do not support HDMI-CEC.
"
Anynet+ devices must be connected to the TV with an HDMI cable. Note that some HDMI cables may not
support Anynet+ (HDMI-CEC).
"
The TV remote control may not work under certain circumstances. If this occurs, select the Anynet+ device
again.
"
Anynet+ (HDMI-CEC) works only with external devices that support HDMI-CEC and only when those
devices are either in standby mode or turned on.
"
Anynet+ (HDMI-CEC) can control up to 12 compatible external devices (up to 3 of the same type) except for
home theaters. Anynet+ (HDMI-CEC) can control only one home theater system.
"
To listen to 5.1-channel audio from an external device, connect the device to the TV via an HDMI cable and
connect the home theater system directly to the TV's digital audio output connector.
Loading ...
Loading ...
Loading ...