Loading ...
Loading ...
Loading ...
SettingupyourTV 47
Setti_ the time zone
To add a channel to the channel memory:
o:* Highlight the checked box next to the channel number you
wish to add, and then press the ENTER button to remove the
check.
NOTE Youcanalsoblockspecificchannelssothattheycannotbetuned
untilyouunlockthem.Forinformation,see"Lockingchannels"on
page77.
To manually add digital sub-channels on a physical channel:
Use the Channel Numbers and the (Dash 100) on the remote
control to enter the channel number (for example, 56-1).
If the channel is found, the number will be added to the list and
the box will be unchecked. If the channel is not found, a
message appears.
NOTE SkippedchannelscannotbeselectedwiththeCH A/V (arrow)
buttons;however,theycanbeaccessedusingthenumberkeysonthe
remotecontrol.
SettingtheAVinputmode
This setting determines the configuration of the shared AV input on
your TV. You can set this input for either ColorStream HD or Video.
Add the following descriptions:
To set the AV Input mode:
1 From Options menu, highlight Input Options, and then press
the ENTER button.
2 Press •/V(arrow) buttons to select AV Input, and then press
the ENTER button.
3 Press •/•(arrow) buttons to select Video or ColorStream
HD, and then press the ENTER button to save your new setting.
Settingthetimezone
The Time Zone setup allows you to specify the correct time zone for
your region. This feature allows the TV status information to
display the correct time zone information for your viewing area.
To set the time zone:
1 In the Installation menu, highlight Time Zone, and press the
ENTER button.
2 Press the •/• (arrow) buttons to select the region, and then
press the ENTER button.
Loading ...
Loading ...
Loading ...