Loading ...
Loading ...
Loading ...
4 SettingupyourTV
Auto Tuni_
3 Open the Channel Tuning menu, highlight ANT/CABLE In,
and then press the ENTER button.
(Sample hm_tge) Channel tuning menu - Input configuration
selection
4 Press the A/T (arrow) buttons to select the input source (Cable
or Antenna), and then press the ENTER button to save your
new settings.
Storingchannelsinmemory(optional)
To make sure your TV stops only on the channels you want when
you press the A/T (arrow) buttons on the remote control or the
control panel, store those channels in the TV's memory.
AutoTuning
You can set up the TV to detect all active channels in your area and
store them in its memory. Then you can manually add or erase
individual channels from memory.
NOTE o:÷ YoumustsetuptheANT/GABLEinputsourcebefore
programmingchannels.See"ANT/CABLEIN"on page43.
•:- Theautomaticchannelprogrammingprocesswill erase
channelsthatwerepreviouslyprogrammedintotheTV's
memory.
o:- TotunetheTVtoa channelnotprogrammedin thechannel
memory,youmustusetheChannel Number buttonsonthe
remotecontrol.
•:- ProgrammingchannelswhentheANT/CABLEinputis
configuredfor Cablewill takesubstantiallylongerthanwhenthe
antennainputis configuredforAntenna.Thisisnormal;
however,oncechannelprogrammingis finished,youshouldnot
haveto repeattheprogrammingprocessagainunlessyourCable
TVservicelineupchangessignificantly.
Loading ...
Loading ...
Loading ...