Loading ...
Loading ...
Loading ...
Network Camera User Manual
75
Chapter 10 Image Stitching
You can switch the video output mode for the camera according to your actual demand.
Steps
Note
● The function is only supported by certain device models.
● The actual image stitching mode varies according to different models. The actual model
prevails.
1. Enter the Image Stitching configuration interface: Configuration → System → System Settings
→ Image Stitching.
2. Select the desired video output mode.
Panorama + ePTZ
One stitched panoramic image (8MP) and multiple channels ePTZ
images. Channel 01 is the 8MP panoramic image, and channel 02 and
the subsequent channels are ePTZ images. You can set the number of
the channels for the ePTZ image. Ten channels are available. For
example, if you set the number of the ePTZ channels to 6, then the
live view is seven channels: one 8MP panoramic image and six ePTZ
images.
Panorama
One stitched panoramic image (32MP) and the panoramic image
output from 1 or 3 encoder track.
Original
Four independent original images (8MP). Take the pendent mounting
as an example, when facing the camera lens, the channel order is 01 ~
04 from right to left.
Divided Panorama
The stitched 32MP panoramic image is divided into four 8MP images.
Encoder Track
Stream can be divided into several tracks in order to make up for the
deficiency of decoder. 1 track and 3 tracks are selectable, and it is
recommended to select 3, when the decoder is in poor performance.
Note
The ePTZ channels support patrol function. You can click on the live view image to enable or
disable the patrol function for ePTZ channels.You can set the image settings for each channel in
the original mode.Only the main stream of 2400W and 1600W panorama camera support the
encoder track.
3. Enter the best stitching distance.
Loading ...
Loading ...
Loading ...