Loading ...
Loading ...
Loading ...
Network Camera User Manual
8
Note
● If the device cannot focus with auxiliary focus, you can use Lens Initialization, then use auxiliary
focus again to make the image clear.
● If auxiliary focus cannot help the device focus clearly, you can use manual focus.
3.1.10 Lens Initialization
Lens initialization is used on the device equipped with motorized lens. The function can reset lens
when long time zoom or focus results in blurred image. This function varies according to different
models.
Manual Lens Initialization
Click to operate lens initialization.
Auto Lens Initialization
Go to Configuration → System → Maintenance → Lens Correction to enable this function. You
can set the arming schedule, and the device will correct lens automatically during the
configured time periods.
3.1.11 Quick Set Live View
It offers a quick setup of PTZ, display settings, OSD, video/audio settings on live view page.
Steps
1. Click to show quick setup page.
2. Set PTZ, display settings, OSD, video/audio parameters.
– For PTZ settings, see Lens Parameters Adjustment .
– For display settings, see Display Settings.
– For OSD settings, see OSD.
– For audio and video settings, see Video and Audio.
Note
The function is only supported by certain models.
3.1.12 Lens Parameters Adjustment
It is used to adjust the lens focus, zoom and iris.
Zoom
● Click , and the lens zooms in.
● Click , and the lens zooms out.
Loading ...
Loading ...
Loading ...