Loading ...
Loading ...
Loading ...
NOTE: Completing the other elds on this page is optional.
4. Click the Apply button to save the changes.
Manually congure IPv4 TCP/IP parameters from the control panel
Use the control-panel Settings menus to manually set an IPv4 address, subnet mask, and default gateway.
1. From the Home screen on the printer control panel, open the Settings menu.
2. Open the following menus:
●
Networking
●
Ethernet
●
TCP/IP
●
IPV 4 Settings
●
Cong Method
3. Select the Manual option, and then select the Save button.
4. Open the Manual Settings menu.
5. Select the IP Address, Subnet Mask, or Default Gateway option.
6. Using the numeric keyboard, enter the correct digits for the eld, and then press or touch the OK button.
Repeat the process for each eld, and then select Save.
Manually congure IPv6 TCP/IP parameters from the control panel
Use the control-panel Settings menus to manually set an IPv6 address.
1. From the Home screen on the printer control panel, open the Settings menu.
2. To enable manual conguration, open the following menus:
●
Networking
●
Ethernet
●
TCP/IP
●
IPV6 Settings
3. Select Enable, and then select On.
4. To congure the address, open the Address menu, and then touch the eld to open a keypad.
5. Using the numeric keyboard, enter the correct digits for the eld, and then press or touch the OK button.
6. Select Save.
Link speed and duplex settings
NOTE: This information applies only to Ethernet networks. It does not apply to wireless networks.
88 Chapter 5 Manage the printer ENWW
Loading ...
Loading ...
Loading ...