Loading ...
Loading ...
Loading ...
TROUBLE SHOOTING
Console is not operating correctly
Check to make sure the console cable is securely connected.
Make sure the batteries are installed correctly.
Make sure the batteries still have a charge.
No resistance
Turn the Tension Control Knob (51) to the lowest setting, Remove the Tension
Control Knob (51) from the Front Post (5) and make sure the Tension Cable (27) is
still connected to the Tension Cable coming from the Tension Control Knob (51). If
the problem persists, contact customer service.
The Elliptical wobbles while in use
Turn the Rear Stabilizer End Caps (10) on the Rear Stabilizer (8) as needed to level
the elliptical trainer.
Squeaking noise when in use
The bolts may be loose on the machine, inspect the bolts and tighten any loose ones.
If the problem persists, contact customer service.
Heart Rate Reading Errors
Always hold on to the handlebar grip sensors with two hands instead of just one.
Try to maintain moderate pressure while holding onto the hand pulse sensors.
Make sure that the wire connections for the hand pulse sensors are secure.
MAINTENANCE
Cleaning
The elliptical can be cleaned with a soft cloth and mild detergent. Do not use
abrasives or solvents on plastic parts. Be sure to wipe your perspiration off the
elliptical after each use. Be careful to not get excessive moisture on the console
display panel as this might cause an electrical hazard or the electronics to fail. Keep
the elliptical, especially, the console, out of direct sunlight to prevent screen damage.
Inspect all assembly bolts and pedals on the machine for proper tightness every
week.
Storage
Store the elliptical trainer in a clean and dry environment away from children.
TROUBLE SHOOTING & MAINTENANCE
19
Loading ...
Loading ...