Loading ...
Loading ...
Loading ...
ASSEMBLY
10
3. Handrail Arm Installation
Remove the Pre-Installed Hexagon Socket Head Bolts (40), Spring Washers (41), Big
Washers (46), and Washers (42) from the left and right horizontal posts on the Front
Post (5). Slide a Plastic Bushing (48) down the horizontal shaft on the left side of
Front Post (5), and then attach the Left Handrail Arm (3L) onto the left horizontal post
on the Front Post (5). Secure it using one Hexagon Socket Head Bolt (40), one Spring
Washer (41), one Big Washer (46), and one Washer (42) that was removed
previously. Tighten the Hexagon Socket Head Bolt (40) using the 6mm Allen Wrench
provided.
*Repeat this step for the Right Handrail Arm (3R).
6mm Allen Wrench
1 PC
Loading ...
Loading ...
Loading ...