Loading ...
Loading ...
Loading ...
1. Front and Rear Stabilizers Installation:
Step A: Align the Front Stabilizer (7) onto the front curve of the Main frame (1). Make
sure the transport wheels are positioned toward the front and parallel to the floor. Install
two Carriage Bolts (9) from the bottom, and on the other ends of the bolts attach two Big
Curve Washers (11) and two Cap Nuts (12). Use the Multi Hex Tool with Phillips
Screwdriver to tighten the Cap Nuts (12) until secure.
Step B: Align and Install the Rear Stabilizer (8) onto the rear curve of the Main frame (1)
using two Carriage Bolts (9), two Big Curve Washers (11), and two Cap Nuts (12).
Securely tighten the Cap Nuts (12) with the Multi Hex Tool with Phillips Screwdriver
provided.
Hardware:
ASSEMBLY
8
(9) Carriage Bolt
M8x70
4 PCS
(11) Big Curve Washer
4 PCS
(12) Cap Nut M8
4 PCS
Multi Hex Tool with Phillips Screwdriver
S8, S13, S14, S15
1 PC
Loading ...
Loading ...
Loading ...