Loading ...
Loading ...
Loading ...
retting to Know Your ULTIMA COOK TM Oven
10A. MICRO. Touch this pad before entering
a cooking time when setting a second
or third cycle in multi-cycle cooking.
10B. COOK POWER. Touch this pad after
the cook time has been set, followed
by a Number pad to set the amount of
microwave energy released to cook the
food. The higher the number, the high-
er the power wattage and the faster
the "cooking speed."
11. BROIL. Touch this pad to broil with the
broil element.
12. CRISP. Touch this pad to crisp
precooked foods. Use it also for baking
and for frying bacon and eggs,
sausages, etc.
13. CONVECT/QUICK PREHEAT. Touch
this pad to put oven into the CONVECT
cooking mode.
14. UPPER OVEN CANCEL/CANCEL
OFF. Touch this pad to cancel a
function. See "Interrupting Cooking"
later in this section for more
information.
15. Number Pads. Touch Number pads to
enter cooking times, cook powers,
selection, quantities, or weights.
16. See "Lower Electric Convection Oven
Use and Care Guide" (Models
KEHC309J, KEHC379J).
NOTES:
• If you touch one Function pad and then
want to choose another Function pad in the
same cycle, you must press CANCEL first.
• If you attempt to enter unacceptable
instructions, three tones will sound. Touch
CANCEL and re-enter the instructions.
Audible signals
Audible signals are available to guide you
when setting and using your oven:
• A programming tone will sound each
time you touch a pad.
• Four tones signal the end of a cooking
cycle or the Minute Timer countdown.
Choosing cooking function
settings
The cooking functions discussed in the
"Getting to Know Your ULTIMA COOK Oven"
and "Microwave Cooking" sections use
Function pads to choose cooking function set-
tings. Another way to choose cooking function
settings is by using Code pads. Code pads
are Number pads used to select a cook power,
food settings, or quantities. Food setting charts
found in the "CUSTOM REHEAT," "CUSTOM
DEFROST," and "ULTIMA COOK cooking
chart" sections list only Code pads for food
settings. The charts in "Using code pads" in
the "Microwave Cooking" section list all the
available Code pads.
Interrupting cooking
You can stop the oven during a cycle by
opening the door. The oven stops heating
and the fan stops, but the light stays on.
To restart cooking for all cycles, close
the door and
If you do not want to continue cooking:
• Close the door and the light goes off
AND
_" CANCEL "i UPPEROVE,
Using the control lock
The control lock prevents unwanted use of
the oven by disabling the control panel
function pads.
NOTES:
• On combo ovens, control lock is available
only when both ovens are not in use. It is also
not available during the Self-Cleaning cycle.
• On single ovens, control lock is only avail-
able when the oven is not in use.
• Control lock does not disable the Timer
or Clock.
• Set control lock when cleaning the control
panel to prevent oven from accidentally
turning on.
8
Loading ...
Loading ...
Loading ...