Loading ...
Loading ...
Loading ...
- 8
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Straße 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2021/04/01
We hereby declare that the product de-
scribed below complies with the relevant
provisions of the following UK Regulations,
both in its basic design and construction as
well as in the version put into circulation by
us. This declaration shall cease to be valid
if the product is modified without our prior
approval.
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Straße 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2021/01/01
Note:
The equipment may only be installed by
– KÄRCHER service engineers
– persons authorized by KÄRCHER
The following requirements are necessary
in order to install the equipment:
– Horizontal even area, with a solid sur-
face with the dimensions 1,200 x 600
mm.
– Plant to be freely accessible for mainte-
nance jobs.
– Surrounding temperature not exceed-
ing 40 °C.
– Environment free of explosion risks.
– For electrical connection refer to techni-
cal specifications.
– For water connection refer to technical
specifications.
– Water drainage
Unpack the equpiment and dispose of the
packing material properly.
Fasten the anti-skid clamps for the ma-
chine feet to the floor.
Place the high pressure module with
the machine feet in the anti-skid
clamps.
EU Declaration of Conformity
Product: High pressure cleaner
Type: 2.640-xxx
Type: 2.641-xxx
Type: 2.642-xxx
Relevant EU Directives
2006/42/EC (+2009/127/EC)
2014/30/EU
2009/125/EG + 2009/1781
Applied harmonized standards
EN 60335–1
EN 60335–2–79
EN 55014-1:2017 + A11:2020
EN 55014–2: 2015
EN 61000–3–2: 2014
EN 61000–3–11: 2000
EN 62233: 2008
Applied conformity evaluation method
2000/14/EG: Anhang V
Chairman of the Board of Management
Director Regulatory Affairs & Certification
Declaration of Conformity
Product: High pressure cleaner
Type: 2.640-xxx
Type: 2.641-xxx
Type: 2.642-xxx
Currently applicable UK Regulations
S.I. 2008/1597 (as amended)
S.I. 2016/1091 (as amended)
2009/1257EC + 2009/1781
Applied designated standards
EN 60335–1
EN 60335–2–79
EN 55014-1:2017 + A11:2020
EN 55014–2: 2015
EN 61000–3–2: 2014
EN 61000–3–11: 2000
EN 62233: 2008
Applied conformity assessment proce-
dure
S.I. 2001/1701 (as amended): Schedule 8
Chairman of the Board of Management
Director Regulatory Affairs & Certification
Installing the unit (only for
experts)
Preparing the installation place
Unpack the equipment
Aligning the unit and installing it
20 EN
Loading ...
Loading ...
Loading ...