Loading ...
Loading ...
Loading ...
3. Make sure that the throttle trigger is locked at the
idle position when the throttle trigger lockout is
released.
4. Start the product and apply full throttle.
5. Release the throttle trigger and make sure that the
blades stop and stay stationary.
WARNING: If the blades move
when the throttle trigger is in the idle
position, then the carburetor idle speed
must be adjusted. Refer to
To adjust the
idle speed on page 25
.
Stop switch
Start the engine. Make sure that the engine stops when
you move the stop switch to the stop position.
To do a check of the cutting attachment guard
WARNING:
An incorrect or damaged
cutting attachment guard can cause serious
injury. Refer to
Safety instructions for
operation on page 4
.
WARNING: Always use the
recommended cutting attachment guard for
the cutting attachment that you use. If an
incorrect or damaged cutting attachment
guard is installed, this can cause serious
injury. Refer to
Technical data on page 28
.
The cutting attachment guard prevents injuries from
objects that eject in the direction of the operator. It
also prevents injuries that occur if you touch the cutting
attachment.
1. Do a visual check for damages, for example cracks.
2. Replace the cutting attachment guard if it is
damaged.
To do a check of the vibration damping system
WARNING: An incorrectly wound cord
or an incorrect cutting attachment increases
the level of vibration. Refer to
Safety
instructions for operation on page 4
.
The vibration damping system decreases vibration in
the handles to a minimum which makes the operation
easier.
1. Stop the engine.
2. Do a visual check for deformation and damage.
1069 - 009 - 13.06.2023
7
Loading ...
Loading ...
Loading ...