Loading ...
Loading ...
Loading ...
WARNING: Do not use the product if
the spark arrester screen on the muffler is
missing or damaged.
1. Examine the muffler for damages.
2. Make sure that the muffler is correctly attached to
the product.
3. If your product has a special spark arrester screen,
clean the spark arrester screen weekly.
4. Replace a damaged spark arrester screen.
CAUTION: If the spark arrester screen
is blocked, the product becomes too hot
and this causes damage to the cylinder and
piston.
Air filter
Remove dust and dirt from the air filter to keep it clean
and prevent these problems:
• Carburetor malfunctions.
• Problems when you start the product.
• Loss of engine power.
• Increased wear to engine parts.
• Too much fuel consumption.
To clean the air filter
Clean the air filter regularly from dirt and dust. This
prevents carburetor malfunctions, starting problems,
loss of engine power, wear to engine parts and more
fuel consumption than usual.
• Clean the air filter at an interval of 25 hours, or more
regularly if you operate the product in conditions with
much dust.
To apply oil to the foam air filter
CAUTION: Always use Husqvarna
special air filter oil. Do not use other types
of oil.
WARNING: Put on protective gloves.
The air filter oil can cause skin irritation.
1. Put the foam air filter in a plastic bag.
2. Put the oil in the plastic bag.
3. Rub the plastic bag to supply the oil equally across
the foam air filter.
4. Push the unwanted oil out of the foam air filter while
in the plastic bag.
To lubricate the bevel gear
1. Remove the cutting equipment.
2. Put the product with the grease plug at its highest
position.
1069 - 009 - 13.06.2023
23
Loading ...
Loading ...
Loading ...