Loading ...
Loading ...
Loading ...
www.husqvarna.com
Original instructions
1143279-26
2023-06-16
- Contents
- Introduction
- Safety
- Assembly
- Introduction
- To assemble the throttle handle
- To assemble the handlebar
- To assemble the handlebar
- To assemble the cutting equipment
- To attach the trimmer guard or combination guard for trimmer head and plastic blades
- To attach a trimmer head or plastic blade
- To attach the guard extension
- To remove the guard extension
- To attach the grass blade and the grass blade guard/combination guard
- To install the saw blade
- To install the blade guard
- To adjust the harness
- Quick release function of the harness
- Operation
- Introduction
- Before you operate the product
- Fuel
- Work position
- Correct balance of the product
- To prepare the product for start
- To start the product
- To start with a throttle handle with a start throttle lock
- To stop the product
- Blade thrust
- General work instructions
- Forestry clearing with a saw blade
- Brush cutting with a saw blade
- Grass clearing with a grass blade
- Grass trimming with a trimmer head
- Maintenance
- Introduction
- Maintenance schedule
- To clean the cooling system
- To do a check of the muffler
- Air filter
- To clean the air filter
- To apply oil to the foam air filter
- To lubricate the bevel gear
- To attach and remove the locknut
- To examine the spark plug
- To adjust the engine
- To adjust the low speed needle (L)
- To adjust the high speed needle (H)
- To adjust the start throttle speed
- To adjust the idle speed
- To sharpen the grass knife and grass blade
- To sharpen the saw blade
- Troubleshooting
- Transportation, storage and disposal
- Technical data
- Accessories
- Declaration of Conformity