Loading ...
Loading ...
Loading ...
3. Move the product from side to side when you cut
grass. Use full speed.
To sweep the grass
The airflow from the rotating trimmer line can be used to
remove cut grass from an area.
1. Hold the trimmer head and the trimmer line parallel
to the ground and above the ground.
2. Apply full throttle.
3. Move the trimmer head from side to side and sweep
the grass.
WARNING: Clean the trimmer head
cover each time you assemble new trimmer
line to prevent unbalance and vibrations in
the handles. Also do a check of the other
parts of the trimmer head and clean it if
necessary.
Maintenance
Introduction
WARNING: Before you do
maintenance, you must read and
understand the safety chapter.
For all servicing and repair work on the product, special
training is necessary. We guarantee the availability of
professional repairs and servicing. If your dealer is not
a service agent, speak to them for information about the
nearest service agent.
For more detailed information, refer to .
Maintenance schedule
Maintenance Daily Weekly Monthly
Clean the external surface. X
Examine the harness for damages. X
Examine the suspension ring for damages. X
Do a check of the handle and the handlebar to make sure that they are attached
correctly and not damaged.
X
Make sure that the throttle trigger lock and the throttle works correctly. X
Do a check of the stop switch to make sure that it operates correctly. X
Make sure that the cutting attachment does not rotate at idle speed. X
Clean the air filter. Replace if it is necessary. X
Make sure that the blade is sharp and put correctly in the center, look for cracks.
If the blade is not put correctly, it can cause damage to the product.
X
Examine the cutting attachment guard for damages and cracks. If it is damaged,
replace it.
X
Examine the trimmer head for damages and cracks. If it is damaged, replace it. X
Make sure that the screws and nuts are tight. X
Examine the engine, the fuel tank and the fuel lines for leaks. X
Examine the transport guard. Make sure that the blade is not damaged and that
the transport guard can be attached correctly.
X
1069 - 009 - 13.06.2023 21
Loading ...
Loading ...
Loading ...