Loading ...
Loading ...
Loading ...
6. Turn the socket wrench counterclockwise to tighten
the locknut. Make sure that the torque of the locknut
is 35-50 Nm (3.5-5 kpm). Hold the shaft of the socket
wrench as near the blade guard as possible.
G
F
D
B
C
a) Make sure that you operate the socket wrench in
the identified area when you loosen or tighten the
saw blade nut.
To install the blade guard
CAUTION:
Only use the approved
guard for the blades. Refer to
Accessories
on page 29
.
1. Remove the bracket (H).
2. Attach the adapter (I) and bracket (J) with the 2
screws (K).
3. Attach the blade guard (A) to the adapter with the 4
screws (L).
J K
I
L
A
H
To adjust the harness
1. Put on the harness of the product.
2. Push the 2 parts of the breastplate together.
3. Tighten the hip strap tightly. Make sure that the hip
strap aligns with the hip.
4. Tighten the chest strap below your left arm tightly.
The chest strap must be tight against your body.
1069 - 009 - 13.06.2023
13
Loading ...
Loading ...
Loading ...