Husqvarna 535RXT Brushcutter

Operator's Manual - Page 6

For 535RXT.

PDF File Manual, 32 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Use clothing made of a strong fabric. Always use
heavy, long pants and long sleeves. Do not use
loose clothing that can catch on twigs and branches.
Do not use jewelry, short pants or sandals. Do not
go with bare feet. Put your hair up safely above
shoulder level.
Keep first aid equipment near.
Safety devices on the product
For information about where to find the safety devices,
see
Safety instructions for assembly on page 4
.
WARNING: Read the warning
instructions that follow before you use the
product.
Do not use a product with damaged safety devices.
Do a check of and do maintenance on the safety
devices regularly. If the safety devices are damaged,
speak to your Husqvarna service agent.
Do not make changes to safety devices. Do not
use the product if protective covers, safety switches
or other protective devices are not attached or are
damaged.
For all service and repair work on the product,
especially for the safety devices, special training is
necessary. If the safety devices fail the checks given
in this operator's manual, you must let a service
agent help you. We guarantee that professional
repairs and service is available. If your dealer is not
a service agent, speak to them for information about
the nearest service agent.
Do not use a cutting attachment without an approved
and correctly attached cutting attachment guard. See
To assemble the cutting equipment on page 11
.
Cutting attachment
WARNING:
The cutting attachment
must not rotate when you do work on it.
Make sure that the engine has stopped.
Remove the spark plug cap before you do
work on the cutting attachment.
WARNING: Make sure that the cutting
attachment is not damaged. A damaged
cutting attachment can cause accidents.
Replace a damaged cutting attachment.
WARNING: Use the correct cutting
attachment. Only use the cutting attachment
with the guards we recommend, refer to
Accessories on page 29
.
To do a check of the throttle trigger lockout
1. Make sure that the throttle trigger lockout (A) and
throttle trigger (B) move freely and that the return
spring works correctly.
A
B
2. Push down the throttle trigger lockout and make
sure that it goes back to its initial position when you
release it.
6
1069 - 009 - 13.06.2023
Loading ...
Loading ...
Loading ...