Loading ...
Loading ...
Loading ...
5. Adjust the shoulder strap until the weight is equal on
your shoulders.
6. Adjust the height of the suspension point.
For forestry clearing, the correct height of the
suspension is approximately 10 cm below your hip.
Refer to
Correct balance of the product on page 16
.
Quick release function of the harness
WARNING: Do not use the harness if
the quick release function is damaged. Make
sure that the quick release function operates
correctly when you adjust the product.
WARNING: If the product is not safely
attached to the harness, you can not control
the product and that can result in injury to
you or others.
The quick release function is at the front of the harness.
The harness straps must always stay at the correct
position.
In an emergency, the quick release function helps you to
remove the product safely.
Operation
Introduction
WARNING: Before you operate the
product, you must read and understand the
safety chapter.
Before you operate the product
• Examine the work area to make sure that you know
the type of terrain, the slope of the ground and if
there are obstacles such as stones, branches and
ditches.
• Do an overhaul inspection of the product.
• Do the safety inspections, maintenance and
servicing that are given in this manual.
• Make sure that all covers, guards, handles and the
cutting equipment are correctly attached and not
damaged.
• Make sure that there are no cracks at the bottom of
the saw blade or grass blade teeth or by the center
hole of the blade. Replace the blade if it is damaged.
• Examine the support flange for cracks. Replace the
support flange if it is damaged.
• Make sure that the locknut can not be removed by
hand. If you can remove it by hand, it does not
lock the cutting attachment sufficiently and you must
replace it.
• Examine the blade guard for damages or cracks.
Replace the blade guard if it has been hit or if it has
cracks.
• Examine the trimmer head and cutting attachment
guard for damages or cracks. Replace the trimmer
14 1069 - 009 - 13.06.2023
Loading ...
Loading ...
Loading ...